Home Crosswords Crossword: Level 1 – Air Brake Mechanical Components

Crossword: Level 1 – Air Brake Mechanical Components

15
16
17
18
19
20
21
42
67
87
88
89
90
92
115
117
137
138
139
140
142
163
167
188
189
190
191
192
193
213
227
235
236
237
238
239
245
252
260
263
270
274
277
285
291
292
293
294
295
296
299
302
305
306
307
308
309
310
311
312
313
314
315
320
324
327
332
335
340
342
345
349
352
357
364
365
366
367
368
369
370
371
372
373
374
377
382
390
392
395
399
401
402
403
404
405
406
407
408
415
417
420
424
432
440
442
445
449
467
474
486
487
488
489
490
491
492

Across

  • 15-21 :The brake return ____________ hold the shoes back toward their anchors when released.
  • 87-90 :One of two basic types of foundation brakes.
  • 137-140 :One of two basic types of foundation brakes.
  • 188-193 :The ___________ is usually riveted onto the steel shoe.
  • 235-239 :The _____________ and their linings contact the drum to create friction.
  • 291-296 :The brake linings are usually attached to the shoes with ____________.
  • 305-315 :When brake drums get over-heated, __________-_______________ can form on the inner surface, small cracks that can enlarge over time.
  • 364-374 :When the brakes are properly set up, the slack adjustor should meet chamber push rod at a ________-_______________.
  • 401-408 :Many brakes linings are made from ___________ with can cause serious health problems.
  • 486-492 :The ____________ is a clamping device.

Down

  • 17-192 :The brake cam shafts work because of the _____________ caused by the brake chamber.
  • 90-140 :The actuator for the brakes shoes.
  • 138-263 :The ______________ is attached to the brakes shoe to reduce friction and torque.
  • 227-402 :The S-cams are rotated inside ____________ that are often made of brass.
  • 235-335 :The __________ adjustor is used to adjust for lining wear.
  • 245-445 :Self adjusting slack adjustors.
  • 274-474 :The brake calliper moves in and out on a ___________-_____.
  • 307-432 :The _______________ prevents the brake shoes from rotating with the drum when the brakes are applied.
  • 315-440 :The backing plate or dust ___________ should always be kept in place because they control the air currents that keep the brake drums cool.
  • 342-492 :The brake ____________ uses air pressure to create the force to apply the brakes.