Home Crosswords Crossword: Level 2 – Engine Bearings

Crossword: Level 2 – Engine Bearings

10
11
12
13
14
15
16
17
19
21
30
35
44
46
55
59
60
61
62
63
64
65
66
67
69
71
77
80
85
90
94
96
102
105
110
115
119
121
127
130
131
132
133
134
135
136
140
144
146
152
155
162
163
164
165
166
167
168
169
170
171
172
173
177
178
179
180
181
182
190
194
196
198
200
202
207
215
219
221
223
225
230
232
240
244
246
248
250
255
257
265
269
271
273
275
278
279
280
281
282
285
286
287
288
289
290
291
294
296
298
300
305
315
321
323
325
327
328
329
330
331
340
346
348
350
352
373
375
376
377
378
379
380
388
389
390
391
392
393
394
395
396
397
398
399
400
402
423
425
448
450
475
500

Across

  • 10-17 :These are often classified as friction and non-friction.
  • 59-67 :Bearing materials are in constant contact with the lubricating oil so they must be able resist ______________.
  • 130-136 :_________________ and holes may be machined into the bearing.
  • 162-173 :The principle of _____________ lubrication.
  • 177-182 :Bearing ____________ is necessary to keep the bearing seated in the bore during assembly.
  • 278-282 :A common name for split style bearings.
  • 285-291 :A sleeve type bearing or ___________ is pressed into their housing.
  • 327-331 :Bearing ___________ is the press fit that seats the bearing halves after assembly.
  • 376-380 :Overlays are most commonly a lead/tin _______________.
  • 388-400 :________________ is the ability of the bearing lining material to absorb dirt or hard particles that are suspended in the engine oil.

Down

  • 10-135 :Copper and tin alloy is often used as bearing material.
  • 19-294 :_____________-_______ are the most widely used method for positioning the bearing shells.
  • 21-346 :________________ is the ability of the bearing lining material to conform or adjust to imperfections in the shaft.
  • 30-180 :____________ resistance is the ability of a bearing to withstand continual loading.
  • 65-340 :The ______________ fit creates crush to retain the bearing in its bore.
  • 77-202 :__________ type bearings limit the endwise movement of the crankshaft or camshaft.
  • 173-448 :_________-____________ means a bearing is tapered very slightly at the parting line.
  • 182-282 :A ____________ is not a common method used as locating lugs for bearings.
  • 200-500 :The majority of bearings used in diesel engines are of __________-_____________ construction.
  • 230-330 :A mechanic will ________ sleeve type bearings or bushings into their housing or bore with an interference fit.
  • 327-402 :The majority of wear occurs while the engine is ______________.