Brake Lights stay on

Mechanics Hub Forums Bus & Coach BlueBird Brake Lights stay on

This topic contains 5 replies, has 0 voices, and was last updated by  Scott Phoenix 5 years, 1 month ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
  • #25986 Reply

    I have a ’06 Blue Bird Flat Nose Hydraulic Brakes. The Brake lights stay on as if you are stepping on the Brakes. We have tried replacing that Brake switch down on the pedal and that didn’t do it. We check our wiring back at the Lights, checked the wiring underneath. Any other ideas?

    #29276 Reply

    John Whelan


    So the problem is strictly electrical and there’s nothing going on mechanically?

    Do you have a schematic or the body /VIN numbers?

    I found this link to a wiring schematics search.

    Not sure how detailed the wiring would be but it’s worth a shot 🙂

    #29283 Reply

    Maybe this bus has a multiplex system and that may be at fault. You should be able to see in the link John has provided.

    #29285 Reply

    John Whelan

    Thomas started multiplexing in 2006 with their conventionals but not in the pusher buses. I’m not familiar with Bluebirds but curious to see the schematics.

    #29286 Reply

    Is the brake booster motor activating with the key in the off position? do you have a flow switch issue at the booster. I tis common for ours to rust jack the plastic switch till it breaks off

    #29292 Reply

    Pat Milner

    Is threre a stuck relay that operates the lights?

Viewing 6 posts - 1 through 6 (of 6 total)
Reply To: Brake Lights stay on
Your information: