C 8.3 cummins Wet Sleeve installation

Mechanics Hub Forums Diesel Engines Cummins C 8.3 cummins Wet Sleeve installation

This topic contains 0 replies, has 1 voice, and was last updated by  Tara Lane 5 months, 2 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #49626 Reply

    Tara Lane

    I can not find any instructions what so ever on how to install the liners into the block on a 8.3. Can anyone point me in the right direction? This is the only part I am having trouble with.

    #49636 Reply

    John Whelan

    What year is your Cummins? Usually once the liner seals are installed and lubricated the liner pushes in to the block by hand then gently tapped in with a rubber mallet. Then there are liner hold downs that seat it properly so the protrusion can be checked. This ensures a good seal on the head gasket when the head is torqued down.

Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: C 8.3 cummins Wet Sleeve installation
Your information: